ClearOne MAX EX Spezifikationen PDF herunterladen (Seite 16)

12 Technical Services: 800.283.5936

•

Select nnew ddial pplan llocation

: Click the radio button for the method you wish to use to have your dial plan

loaded into your MAX IP phone. Click the

File

radio button if you want the dial plan loaded from a file

located on the local PC or click the

Manual cconfiguration

radio button if you want to set up the dial plan

manually through this screen. Note that when the file method is chosen, the

Upload

button is active and the

Apply

button is inactive; when the manual configuration method is chosen, the

Apply

button is active and

the

Upload

button is inactive.

•

Load FFrom FFile

: If you are setting up this phone to be part of a group of phones with similar settings, then it

is recommended that you use the file method (see page 29 for more information on the dial plan

configuration file). This method ensures that each phone in the group uses the same dial plan settings.

(Although the name of your dial plan file can be any name you wish, it is stored in the MAX IP phone in a file

named C1MAX1AVDIAL.txt.) Your dial plan file can be located in different directories in order to provide for

different settings for different phones, such as different dial plans for domestic calls versus international calls.

Click the

Browse

button to navigate to the directory where the dial plan is located and then click the

Upload

button to load the dial plan file into your MAX IP phone.

•

Manual CConfiguration

: If you do not have a dial plan file set up and stored on your local PC, or if you wish

to create a dial plan for only this MAX IP phone, then you should use the manual configuration fields on

this screen.

Note:

The manual settings are structured for typical dialing plans in the United States.

• Manual send key: Click the drop-down box and select the key you want to press after entering a dialed

number. Values are #, *, or none. If none is selected, then there is no terminating digit and the specified

number of digits must be entered before the phone will dial.

• Total dial timer: This is total time allowed to complete digit entry before a re-order is generated. Values

are 1, 2, and 3 minutes.

• Interdigit timer: This is the maximum amount of time allowed between digits entered into the phone after

the first digit is pressed, before digits are sent automatically. Values are 15, 30, and 45 seconds.

• Extension dialing: Click the drop-down box to select the number of digits in the telephone extension of

your organization’s extension configuration. Values are 3, 4, and 7 digits. Click the

Enable

check box to

enable this feature or uncheck the box to disable it.

• Local dialing (Prefix): Click the drop-down box to select the prefix required for dialing offsite. Values are 8

and 9. Click the

Enable

check box to enable this feature or uncheck the box to disable it.

• Long distance dialing (Prefix): Click the drop-down box to select the prefix for dialing offsite long

distance. Values are 81 and 91. Click the

Enable

check box to enable this feature or uncheck the box to

disable it.

• Emergency dialing: Click the drop-down box to select the number required for emergency dialing. Values

are 811 and 911.

• Operator dialing: Click the drop-down box to select the number required to reach the operator. Values

are 0.

Click the

Apply

button to activate any changes made to the manual configuration.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

ClearOne MAX EX Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für IP-Telefone ClearOne MAX EX