ClearOne MAX EX Spezifikationen PDF herunterladen (Seite 11)

Chapter 2: Getting Started 7

MANUALLY ASSIGNING AN IP ADDRESS

If DHCP is disabled, or you wish to assign a static IP address, then perform the following steps:

1. Press and hold the

REDIAL/PROG

key until the program icon appears on the LCD screen (see figure 2.3).

Note:

If a key is not pressed within 30 seconds of entering program mode, the MAX IP phone will beep

and return to operation mode.

2. Press the

key. The default IP address is displayed on the LCD screen. If this address was obtained from

DHCP, then you can use it to access the web interface. If you cannot access the web interface using this

address, then you need to either configure DHCP as explained above so that the IP address can be

obtained automatically, or you must manually enter a static IP address. Continue with step 3 to manually

enter a static IP address for the MAX IP phone.

3. Press the

key. The current DHCP setting is displayed on the LCD screen. A “1” indicates that DHCP

mode is enabled; a “0” indicates that DHCP mode is disabled.

4. If “0” is the current setting, then continue with step 8, otherwise continue with step 5.

5. Press the

REDIAL/PROG

key. The current DHCP mode “1” flashes on the LCD screen.

6. Press the

key. The new DHCP mode “0” flashes on the LCD screen.

7. Press the

REDIAL/PROG

key. DHCP mode is disabled.

8. Press the

key. The current IP address (such as 0.0.0.0) is displayed on the LCD screen.

9. Press the

REDIAL/PROG

key. The current IP address flashes on the LCD screen.

10. Press the

CLEAR

key. The current IP address is deleted one character at a time.

11. Using the number keys, enter the static IP address. Use the

key to enter the decimal separators in the IP

address.

12. Press the

REDIAL/PROG

key. The new static IP address is activated in the MAX IP phone.

13. Press the

key and repeat steps 9-12 above to set the subnet mask, then continue with step 14.

14. Press the

REDIAL/PROG

key. The MAX IP phone reboots.

MANUALLY PROVISIONING YOUR MAX IP PHONE

The easiest way to manually provision your MAX IP phone is through the web interface. To access the web

interface for your MAX IP phone, perform the following steps:

1. Press and hold the

REDIAL/PROG

key until the program icon appears on the LCD screen (see figure 2.3).

2. Press the

key. The phone’s IP address is displayed on the LCD screen.

3. Make note of the IP address and press the

CLEAR

key. Program mode is exited.

4. Start Internet Explorer (only the Internet Explorer web browser, release 6.0 or later with Java 1.5 or later

installed, works with the MAX IP phone).

5. Enter the phone’s IP address into the Internet Explorer address field and press the

ENTER

key on your

computer’s keyboard. (You can also enter the DNS name or the phone’s name on the network in order to

get to the web interface login screen.)

FIGURE 2.3 MAX IP LCD Program icon

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

ClearOne MAX EX Spezifikationen Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für IP-Telefone ClearOne MAX EX